Administrator Guide

e Click View Details to view complete overview, Status, Network, Hardware and Logs of the selected device.

• Overview — Provides a complete overview of the System, Location, Capabilities, Network, and Drives of the selected

device.

• Status— Provide details of Apps that are installed and running on the system. Installed Update also provides details about

the Processor running and system performance. The details of the Remote session are displayed for the selected devices.

• Network— Provides the NIC card details and the Network Details of the selected device.

• Hardware— Provides the details of the following attributes:

• Disks: Displays the number of partitions available on the device and its memory size.

• Drives: Displays the number of drives and its memory size.

• Systems: Displays the hardware related details.

• Logs— Provides the details of the Audit Trails and Deployed Packages of the selected device.

f Click Add/Modify Filter to lter devices page depending on Name, IP Address, Operating System, Platform, Last Check-in and

MAC Address. Use the following guidelines:

Figure 7. Add/Modify Filter

1 To lter devices page depending on the device name, enter Device name in the Name eld, and then click Update.

NOTE

: Use Partial Name of the device, if you are searching a device by part of the names.

2 To lter devices page depending on the IP address, enter the IP address of the device in the IP Address eld, and then

click Update.

3 From the drop-down lists, select your preferred Operating System and the device Platform to lter the devices page

depending on the operating system and platform.

4 From the Last Check-in drop-down list, select either After or Between based on your preference and specify the date and

time in MM/DD/YYYY hh:mm format during which the device was checked-in.

5 Enter the MAC address of the device, and click Update to lter the devices page depending on the MAC address of the

device.

6 Click Reset to reset the entered value.

7 Click Update to add a lter to the devices page

8 Pause the mouse pointer on the ltered attribute, and then click the x icon displayed next to the lter to remove the applied

lter.

Select the preferred device to perform the following real time commands:

a To push a package to specic device, click Update.

b To restart the selected device, click Reboot Device.

c To shutdown or stop the selected device, click Shutdown.

d To send a message for the selected device, click Send Message. The Send Message screen is displayed.

1 Select the radio button of the preferred message type from the displayed message type options. The following are the

message types:

Devices