Administrator Guide

Deploying Teradici image version 5.x using selected devices in WDM
To deploy Teradici image version 5.x using selected devices in WDM, do the following:
1 Open WDM Web UI and login as administrator.
2 Go to Applications > Images, and click the + button to download the package registration utility
3 Click the RSP button from the package registration utility.
4 Click the Browse button, and upload ThreadX 5.x rmware package to WDM.
5 Go to WDM Web UI again, and go to Devices page.
6 Select the devices which are required to upgrade using the check box.
7 Click the Update button, and select the registered package from the Images category.
8 Click the Save button to schedule package deployment. The package gets deployed.
9 Go to Jobs page and conrm whether the package deployment is successfully completed. The device gets rebooted and discovered
to WDM automatically as ThreadX_5x devices.
Figure 80. Devices
NOTE
: After successful deployment of the 5.x rmware on the client, if the devices are not appearing on the WDM as
ThreadX5x devices, refer to EMSDK fails to start due to port number to resolve port conict of the ThreadX 5x software
components, and see if the problem is solved.
90 Management of Teradici device using WDM