Install Guide

Figure 7. Congure Software Repository Server Screen
10. Enter the authentication details for the Software Repository:
a. Congure New Repository Server — select this option if you want the installer to congure the repository server. You can
create a new user or use an existing user.
b. Use Existing Repository Server — select this option if you have already congured the Repository Server.
c. Enter Protocols — Select the protocol and settings to distribute software to the managed devices. HTTPS is selected by
default. You can also select
FTP for ThreadX 4.x and CIFS for ThreadX 5.x.
d. Authentication Type — Windows is selected by default. You can also select Basic.
NOTE: Basic authentication is required for Linux.
e. Username — Rapport is displayed by default. You can change this. If you select the Use existing Repository user option,
enter the user name of the existing user.
f. Password — Enter the password to access the repository.
NOTE: Password must match complexity rules of underlying Windows OS.
g. Conrm Password — If you are creating a new user, enter the password again.
11. Click Next to install the other services.
12. DHCP Proxy is selected by default. Select the other services if required. Click Next.
23