Install Guide

bind 10.150.99.102:5172
default_backend servers
backend servers
#Add your multiple back end windows machine IP with 5172 as port
# maxconn represents number of connection- replace 10 with limit #(below 20000)
# server1 server2 are just names and not keywords
server server1 10.150.99.107:5172 maxconn 10
server server2 10.150.99.107:5172 maxconn 10
4. Now validate the HAProxy conguration le with the command sudo haproxy –f /etc/haproxy/haproxy.cfg –c.
If conguration is valid the following message will be shown:
Conguration le is valid
5. Now restart HAProxy service by using the following command:
Sudo service haproxy restart
6. Command to stop the HAProxy service
Sudo service haproxy stop
7. Command to verify the version of HAProxy
Sudo haproxy –f
8. Command to uninstall HAProxy
Sudo apt-get remove haproxy
or
Sudo apt-get purge –auto-remove haproxy
GUID-8B851175-579E-4F23-8E25-81F5E2CC4869
Installing Teradici Device Proxy Servers
Teradici Device Proxy servers can be installed on the servers which run the following operating systems:
• Windows 2012
• Windows 2012 R2
• Windows 2008 R2 x64bit
Follow the steps provided to install Teradici Device Proxy service:
1. Log in to the system as administrator.
2. Copy the WDM installer folder to the target machine.
3. Go to TeradiciDeviceProxy folder.
4. Double click the WDMTeradiciDeviceProxy.exe le to install the same.
5. Provide the following inputs:
a. Select the path where you want to install Teradici Device Proxy and its dependent components.
b. Select Cert.pem le from the folder <WDM installed location>\Teradici on the machine where ThreadX 5X component
is selected while installing WDM.
88