Install Guide
Table Of Contents
- Dell Wyse Management Suite Version 1.3 Quick Start Guide
- Introduction
- Getting started with Wyse Management Suite
- Installing Wyse Management Suite on private cloud
- Deploying applications to thin clients
- Uninstalling Wyse Management Suite
- Troubleshooting Wyse Management Suite
- Remote database
- Custom installation
- Wyse Management Suite feature matrix
- Accessing file repository
- Create and configure DHCP option tags
- Create and configure DNS SRV records
- Creating and deploying advanced application policy to thin clients
- Registering Windows Embedded Standard device manually
- Registering Linux device manually
- Terms and definitions
WMSEnable=yes \
Server=<Server URL> \
CAValidation=no \
Override=yes
● Example for ThinOS 8.4:
WDAService=yes \
Priority=CCM
CCMEnable=yes \
CCMServer=<Server URL> \
GroupPrefix=< Prefix > \
GroupKey=< Key > \
MQTTServer=<Server URL> \
Override=yes \
CAValidation=no
For more information, see the latest Dell Wyse ThinOS INI guide at support.dell.com.
NOTE:
● For ThinOS 8.3 (ThinOS Lite 2.3) and later versions, a WDA Service Priority command allows you to specify the
management protocol. This command is used to discover the management server.
● The CCM tags for ThinOS version 8.3, 8.4, and 8.5 are different.
Registering devices by using DHCP option tags
About this task
NOTE:
● For detailed instructions on how to add DHCP option tags on the Windows server, see Creating and configuring DHCP
option tags.
You can register the devices by using the following DHCP option tags:
Table 2. Registering device by using DHCP option tags
Option Tag Description
Name—WMS
Data Type—String
Code—165
Description—WMS Server FQDN
This tag points to the Wyse Management Suite server URL. For example,
wmsserver.acme.com:443, where wmsserver.acme.com is fully qualified
domain name of the server where Wyse Management Suite is installed. For
links to register your devices in Wyse Management Suite in public cloud, see
Getting started with Wyse Management Suite on public cloud.
NOTE: Do not use https:// in the server URL, or the thin client will not
register under Wyse Management Suite.
Name—MQTT
Data Type—String
Code—166
Description—MQTT Server
This tag directs the device to the Wyse Management Suite Push Notification
server (PNS). For a private cloud installation, the device gets directed to
the MQTT service on the Wyse Management Suite server. For example,
wmsservername.domain.com:1883.
To register your devices in Wyse Management Suite public cloud, the device
should point to the PNS (MQTT) servers in public cloud. For example,
US1: us1-pns.wysemanagementsuite.com
EU1: eu1-pns.wysemanagementsuite.com
Installing Wyse Management Suite on private cloud 23