Administrator Guide

3. Click the Subnet Mapping option.

4. Enter subnets or ranges, one value per line. You must use hyphen for range separation.

5. Optionally, clear the Allow devices from subnets not mapped to this file repository to download files from this repository as

a fallback method using subnet proximity check box if you want the file repository to be accessed only through the configured

subnets or ranges.

NOTE: The Allow devices from subnets not mapped to this file repository to download files from this repository as a

fallback method using subnet proximity option is selected by default. This feature is not supported on ThinOS 9.x

devices.

Configuring other settings

You can use the following settings to enforce the APNS Warnings, License Expiration Warnings, and other Self Service Legal

Agreements.

• Dismiss License Expiration Warning on Dashboard page—Select this check box to disable the warning for a license expiration

from displaying on the Dashboard page.

• Enable Advanced Dell Wyse Cloud Connect options in Android Settings policy configuration page (Note: Professional Tier

Only)—Select this option to enable Advanced Dell Wyse Cloud Connect options in the Android Settings policy configuration page.

• Heartbeat interval—Enter the time. The device sends heartbeat signal every 60 minutes to 360 minutes.

• Checkin interval—Enter the time. The device sends full checking signal every 8 hours to 24 hours.

• Not Checked In compliance alert—Enter the number of days before a device triggers a Not Checked In compliance alert. The

range is 1–99.

• WMS Console timeout—Enter the idle time in minutes after which the user is logged out of the console. This setting can be

configured by any global administrator. The default value is 30 minutes.

• Enrollment Validation—When the Enrollment Validation option is enabled, the auto-discovered devices are in Pending

Validation state in the Devices page. The tenant can select a single device or multiple devices in the Devices page and validate the

enrollment. The devices are moved to the intended group after they are validated.

Managing Teradici configurations

To add a Teradici server, do the following:

Steps

1. In the Portal Administration tab, under Console Settings, click Teradici.

2. Click Add Server.

The Add Server screen is displayed.

3. Enter the Server Name. The port number is automatically populated.

4. Select the CA Validation check box to enable CA validation.

5. Click Test.

Enable Two-Factor authentication

You must have at least two active global administrator users in the system.

Prerequisites

Create two or more global administrators before proceeding to the task.

About this task

1. Log in to the Wyse Management Suite portal and click the Portal Admin tab.

2. Click Two Factor Authentication under Console Settings.

3. You must select the check box to enable the two factor authentication.

NOTE:

Administrators must verify the second authentication factor using one time passcodes to log in to the

management portal.

4. You will receive a onetime passcode to your e-mail address. Enter the one time passcode.

Portal administration