Dell Wyse Management Suite Version 3.x Release Notes May 2021 Rev.
Notes, cautions, and warnings NOTE: A NOTE indicates important information that helps you make better use of your product. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2020 -2021 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Contents Chapter 1: Release summary..........................................................................................................6 Priority and recommendations..........................................................................................................................................6 Chapter 2: Version matrix..............................................................................................................7 Chapter 3: Wyse Management Suite version 3.2 Hotfix.............
Fixed issues.........................................................................................................................................................................20 Known issues.......................................................................................................................................................................21 Important notes...................................................................................................................................
Compatibility........................................................................................................................................................................41 Supported Dell end-points on Wyse Management Suite....................................................................................41 Supported operating system matrix........................................................................................................................43 Supported browsers.................
1 Release summary Wyse Management Suite is the next generation management solution that enables organizations to centrally configure, monitor, manage, and optimize Dell Hybrid Client powered endpoints and Dell thin clients. Wyse Management Suite can be installed On-premise, in your organization's private cloud, or used as a Software as a Service (SaaS) for automatic maintenance of software without any management software to install.
2 Version matrix The following table summarizes the Wyse Management Suite versions: Table 1. Version matrix Release Version Release Date Release Notes Wyse Management Suite version 3.2.1 May 2021 Wyse Management Suite version 3.2.1 Wyse Management Suite version 3.2 March 2021 Wyse Management Suite version 3.2 Wyse Management Suite version 3.1.1 February 2021 Wyse Management Suite version 3.1 Hotfix 1 Wyse Management Suite version 3.1 December 2020 Wyse Management Suite version 3.
3 Wyse Management Suite version 3.2 Hotfix Compatibility Supported Dell end-points on Wyse Management Suite Table 2. Supported Dell end-points on Wyse Management Suite Operating System Platform Wyse Device Agent versions Windows 10 IoT Enterprise 2019 LTSC Wyse 5070 Thin Client 10.03.06.11.19, 10.04.06.09.19.00 WDA: 14.4.6.5 and later Wyse 5470 Thin Client 10.03.08.07.19.00, 10.03.06.11.19 Wyse Device Agent 14.4.6.5 and later Wyse 5470 AIO Thin Client 10.03.07.06.19.00, 10.03.06.11.19 WDA: 14.4.6.
Table 2. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions OptiPlex 7090 Ultra Dell Client Agent Enabler - 1.0.0-72 and 1.1.0-17 OptiPlex 3090 Ultra Latitude 3320 Dell Ubuntu (Generic) Client OptiPlex 7070 Ultra Ubuntu 18.04, 20.04 OptiPlex 7090 Ultra Dell Client Agent Enabler - 1.0.0-72, 1.1.0-17, and 1.2.0-25, 1.3 OptiPlex 3090 Ultra Latitude 3320 Supported operating system matrix Table 3.
Table 5. Fixed issues (continued) Issue ID Description WMSNG-5250 Fixed the issue where you were unable to save file repository changes when you go through the file count link in File Repository. WMS-515 Fixed the issue where the subnets were not displayed in an order to search a device. WMS-503 Fixed the issue where the Device Exception option does not display the terminal name for ThinOS 9.1 devices.
Table 6. Known issues (continued) Issue number Issue description Workaround WMS-507 Event type and descriptions under the Device Details section and Events tab display references rather than usable information in Wyse Management Suite Public Cloud. Clear the browser cache. WMSNG-560 4 Provision to filter the bulk group change activity event page using the event type is not available. There is no workaround.
Table 8. Windows Server configuration requirements (continued) Devices Server requirements ● Minimum Disk Space—40 GB ● Minimum Memory—8 GB NOTE: For 10,000 devices setup, the minimum memory (RAM) should be 12 GB for Secure MQTT communications.
4 Wyse Management Suite version 3.2 Compatibility Supported Dell end-points on Wyse Management Suite Table 9. Supported Dell end-points on Wyse Management Suite Operating System Platform Wyse Device Agent versions ThinLinux 2.x Wyse 3040 Thin Client 2.2.1.01 Wyse 5070 Thin Client Wyse Device Agent 3.4.7-08 and later Wyse 5470 Thin Client Platform Utility 2.4.7-08 and later Wyse 5070 Thin Client 10.03.06.11.19, 10.04.06.09.19.00 Windows 10 IoT Enterprise 2019 LTSC WDA: 14.4.6.
Table 9. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions Wyse 5070 Extended Thin Client Bundle—Dell Hybrid Client 1.1 - 1288, Dell Hybrid Client 1.5 OptiPlex 7070 Ultra OptiPlex 7090 Ultra Dell Client Agent - 1.0.0-392, 1.1.0-193, and 1.2.0 Dell Client Agent Enabler - 1.0.0-72 and 1.1.0-17 OptiPlex 3090 Ultra Latitude 3320 Dell Ubuntu (Generic) Client OptiPlex 7070 Ultra Ubuntu 18.04, 20.
Table 11. Supported browsers (continued) Browsers Version Internet Explorer 11.0 and later New and enhanced features Secure MQTT support in Wyse Management Suite server The Wyse Management Suite public and private cloud MQTT supports secure port along with the current MQTT port. It enables devices such as the Wyse Embedded Standard, Dell Hybrid Client, and the Wyse Management Suite repository to communicate using the Secure MQTT.
● Using the netsh command—You can use the following command to configure the proxy server information: netsh winhttp set proxy proxy-server="socks=localhost:9090" bypass-list="localhost" C:\Users\administrator.
Configure proxy server information using DHCP option tag for Windows Embedded Standard WDA and Dell Hybrid Client DCA The Windows Embedded Standard and Dell Hybrid Client device must be configured with DHCP IP. For DHCP configuration, DHCP option tag 252 must be configured with WPAD.pac file. Here is a sample PAC file (WPAD.dat) content: o function FindProxyForURL(url, host) o { if (shExpMatch(host, "*wysemanagementsuite.com*")) o { return "SOCKS 100.xxx.xxx.
Dell Hybrid Client user personalization data upload to file repositories Wyse Management Suite administrator must configure repositories to upload the user personalization data to file repositories. On device check-in, Dell Client Agent receives the list of repositories in which it can upload the personalization back-up data to the file repositories (new folder named hybridClientUserData is present for backed up file upload).
ThinOS 9.x firmware and BIOS file upload to cloud Wyse Management Suite The operator can upload and edit the ThinOS firmware, BIOS, and packages from the new Administration > Cloud WMS Repo tab. Wyse Management Suite supports the new platform type. The firmware should contain necessary descriptions, and BIOS should contain the platform information. Once the firmware and BIOS is added, only description is editable. However, description is required.
NOTE: We can restart the Failed Jobs only once, as a new job is created each time that a failed job is restarted. This is applicable for WMS Global Admin, WMS Custom Role (if job permissions are assigned), and Group Admin for specific group. Automatic device unregister Autounregister device rule is force unregistered from Wyse Management Suite. Force unregister happens when the device is not communicating to Wyse Management Suite after the number of days that are configured in the rule.
Table 12. Fixed issues (continued) Issue ID Description WMS-304 Fixed the issue where the local admin password validation fails. WMS-284 Fixed the issue where the reboot option must be enabled in Wyse Management Suite while enabling Kiosk Mode. WMS-266 Fixed the issue where the option Export devices to CSV in Wyse Management Suite cloud does not display the ThinClient location. WMS-248 Fixed the issue where the French Canada keyboard layout is displayed in legacy mode.
Table 13. Known issues (continued) Issue number Issue description Workaround WMSNG-507 Group is not listed in Groups & Config page when an AD group with multiple special characters is imported. There is no workaround. WMSNG-625 Default description is shown in group edit page after importing groups through REST API from Active Directory with Custom description. There is no workaround. WMSNG-1888 Current connection section details of the ThinLinux device remain blank There is no workaround.
Table 13. Known issues (continued) Issue number Issue description Workaround WMSNG-426 9 A message stating NullPointerExpection is displayed in stratus log when Ensure that you do not add any the Windows Embedded Standard device does not report the image special characters as part of the version correctly. image version or the package. You must follow the Windows Embedded operating system imaging instructions.
Table 13. Known issues (continued) Issue number Issue description Workaround WMSNG-4410 HTML tags are visible for End-User events in Users page. There is no workaround. WMSNG-442 0 Memory consumption increases on EU production server when Export devices to .csv is in process. The option Export Devices to CSV has been disabled so that the export option cannot be used. You can generate the report instead of exporting the device list.
NOTE: The previous Wyse Management Suite version should be in good state before upgrading to the next version of Wyse Management Suite. If Wyse Management Suite version 3.1.1.569 is in degenerated state, run the upgrade fix (WMS3.1HF1_TomcatErrorScriptFix.zip) to correct it and then upgrade to the Wyse Management Suite 3.2 version. Server or device agent details Table 15. Server or device agent details File name Description Version WMS_3.2.exe Wyse Management Suite 3.2 3.2.0.780 WMS_Repo.
5 Wyse Management Suite version 3.1 Hotfix 1 Wyse Management Suite version 3.1 Hotfix 1 (3.1.1) release includes important fix for the issue where any password related configurations that are pushed from Wyse Management Suite are not applied correctly to the ThinOS 9.1 device. NOTE: Ensure that you do not upgrade from Wyse Management Suite version 3.1.1.569 to Wyse Management Suite version 3.1.1.580 as this upgrade method is not supported. Installing and running the Wyse Management Suite version 3.1.1.
Table 17. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions Windows 10 Enterprise LTSB 2016 Wyse 5070 Thin Client Wyse Device Agent 14.4.1.5 Wyse 5070 Extended Thin Client 10.03.08.07.19.00, 10.03.06.11.19.00 Windows 10 Enterprise LTSB 2016 Wyse 5470 Thin Client Wyse Device Agent 14.4.1.5 Wyse 5470 All-in-One Thin Client 10.03.08.11.19.00 Windows 10 Enterprise 2019 LTSC Wyse 5070 Thin Client 10.04.06.09.19.
Table 17. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions ● Wyse 5470 Thin Client with ThinOS ● Wyse 5470 Thin Client with PCoIP ● Wyse 5470 AIO Thin Client with ThinOS ● Wyse 5470 AIO Thin Client with PCoIP ThinOS Lite ● Wyse 3020 zero client for Citrix ● Wyse 5010 zero client for Citrix 8.5_024, 8.6_303 Teradici Wyse 5030 PCoIP zero client 17.5.0 and 20.4.1 Wyse 7030 PCoIP zero client Wyse 5050 AIO Dell Hybrid Client— Ubuntu 18.
Fixed issues Table 20. Fixed issues Issue ID Description WMS-455, WMS-460, WMS-461, WMS-462 Fixed an issue where you were not able to establish a VNC connection when you configure the VNC connection using Wyse Management Suite. WMS-463 Fixed an issue with the Wyse Management Suite administrator password policy. WMS-4339 Fixed an issue with the Tomcat Service error when you upgrade from Wyse Management Suite 3.1 to Wyse Management Suite 3.1.1 Known issues Table 21.
Table 21. Known issues (continued) Issue number Issue description Workaround WMSNG-4211 When you log in as a group administrator, Getting resource contention and Internal error message is displayed. There is no workaround. WMSNG-355 7 When you install with Custom Port, the device fails to configure IP address for MQTT. There is no workaround. WMSNG-4337 The Wyse Management Suite UI fails to launch after the update if the WMS Server.xml and Web.xml is modified to allow only http and not https.
Table 23. Server or device agent details (continued) File name Description Version DCA_1.1.0-193_amd64_signed.tar Dell Client Agent 1.1.0-193 DCA_Enabler_1.1.0-17_amd64_signe d.tar.gz Dell Client Agent Enabler 1.1.0-17 configUI_signed.zip ConfigUI Package 1.0.113 Windows Server configuration requirements Table 24.
6 Wyse Management Suite version 3.1 Compatibility Supported Dell end-points on Wyse Management Suite Table 25. Supported Dell end-points on Wyse Management Suite Operating System Platform Wyse Device Agent versions Linux 11.3.110 Wyse 7020 Thin Client Wyse Device Agent 2.0.13-00.1 Platform Utility 1.0.4-0.1 and later ThinLinux 1.0.7 ThinLinux 1.0.7.1 Wyse 3040 Thin Client Wyse Device Agent 2.2.10-00.01 and later Wyse 5060 Thin Client Platform Utility 1.2.3-0.
Table 25.
Table 26. Supported operating systems (continued) Operating system WMS server WMS repository Remote database Windows Server 2019 Standard English Supported Supported Supported Supported browsers Table 27. Supported browsers Browsers Version Chrome 66.0.3359 and later Firefox 56.0 and later Internet Explorer 11.0 and later New and enhanced features Bulk device exception This feature helps you to import device exception using a zip file containing the device service tag and its configuration.
Granular permission role-based Access Global administrator can assign administrative privileges to custom Wyse Management Suite roles like Groups and Config, Devices, Users, Apps & Data on a granular level. The custom roles cannot create any users such as Group users, Viewer, or another custom Wyse Management Suite role. You cannot provide access to the setup page and subscription page of Portal Administration. Custom Wyse Management Suite Role cannot register File Repository and upload Config UI.
Reporting display parameters and highlighting the primary display parameter field Wyse Management Suite displays the monitor details of single and multi-monitor setup. To view the display details, go to the Devices page and click any device. The Device Details page is displayed. The NIC parameters are displayed in the System Info section under Peripheral Details.
The following SSH configurations are added in Wyse Management Suite 3.1: ● SSH server ● Set password for sshuser ● Allow elevated privileges to sshuser NOTE: Ensure that the SSH package is installed on Dell Hybrid Client devices before enabling the SSH configuration. The SSH package can be pushed from Wyse Management Suite On-Premise Local and Remote Repository or Public Remote Repository. SOCKS 5 proxy support in WMS 3.
7070 OptiPlex Conversion to DHC with DCA-E 1.1 Wyse Management Suite 3.1 supports conversion of OptiPlex 7070 with Ubuntu 18.04 to DHC 1.1, using DCA-E. It also supports the Application Policy for converting the OptiPlex 7070 using the DHC 1.1 bundle. NOTE: ● DHC package is pre-installed from factory in Recovery partition. ● If DCA Enabler version 1.0 is installed on your device, you must upgrade it to 1.1. To upgrade DCA Enabler, you must push the DCA_Enabler_ Package 1.1.
Table 29. Known issues (continued) Issue number Issue description Workaround WMSNG-1450 The Quit option in DCA dropdown is not localized. There is no workaround. WMSNG-342 There is no workaround. ThinOS 9.x App fails to install when the policy is configured with Apply to new device. WMSNG-1029 The Wyse Device Agent installer UI displays a message stating Downgrading Dell Wyse Device Agent when the Wyse Device Agent is upgrading. There is no workaround.
Table 31. Server or device agent details (continued) File name Description Version WMS_Import_Tool.exe Wyse Device Manager to Wyse Management Suite Import tool 1.6.0.10 WDA_14.5.0.22_Unified.exe Unified Wyse Device Agents 14.5.0.22 wda-2.4.3-00.01.x86_64.tar ThinLinux 1.0 Agent 2.4.3 wda_3.5.1-13_amd64.tar ThinLinux 2.x Agent 3.5.1-13 DCA_1.1.0-193_amd64_signed.tar Dell Client Agent 1.1.0-193 DCA_Enabler_1.1.0-17_amd64_signe d.tar.gz Dell Client Agent Enabler 1.1.0-17 configUI_signed.
7 Wyse Management Suite version 3.0 Compatibility Supported Dell end-points on Wyse Management Suite Table 33. Supported Dell end-points on Wyse Management Suite Operating System Platform Wyse Device Agent versions Linux 11.3.110 Wyse 5010 Thin Client Wyse Device Agent 2.0.13-00.1 Wyse 5020 Thin Client Platform Utility 1.0.4-0.1 and later Wyse 5020 Thin Client Wyse Device Agent 2.2.23-00.02 and later Wyse 5060 Thin Client Platform Utility 1.0.26-0.
Table 33. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions Wyse 5470 All-in-One Thin Client Wyse Device Agent 14.4.1.
Table 33. Supported Dell end-points on Wyse Management Suite (continued) Operating System Platform Wyse Device Agent versions Dell Hybrid Client— Ubuntu 18.04 Wyse 5070 Bundle—1288 Wyse 5070 Extended Dell Client Agent —1.0.0-392 OptiPlex 7070 Ultra Dell Client Agent Enabler —1.0.0-72 Supported operating system matrix Table 34.
Mapping User Group to Device Group You can map the Active Directory User groups which are imported into Wyse Management Suite to the to respective Device group. The devices will not receive unwanted User Group Policies after mapping. For more information about how to map the User Group to Device Group, see Dell Wyse Management Suite version 3.0 Administrator's Guide at www.dell.com/support.
Support for end-user session reporting for Dell Hybrid Client Wyse Management Suite 3.0 supports End-user session reporting. The following options can be configured to report the session: ● Send user session at run time–The user session is reported when the user logs off from the system. ● Send user session on check in time–The user session is stored locally, and is reported when the device is checked-in to Wyse Management Suite.
NOTE: Installing of any other packages are not supported, and reports as failure to Wyse Management Suite. Support for configuring TLS versions in WMS installer Wyse Management Suite 3.0 on-premise installer is improved to select the Transport Layer Security (TLS) version during the installation or upgrade of the Wyse Management Suite. NOTE: The recommended version of Transport Layer Security is 1.2.
Table 36. Fixed issues (continued) Issue ID Description WMS-246 Fixed an issue where you cannot apply auto login settings through Wyse Management Suite. WMS-152 Fixed an issue where you were unable to configure multiple monitors. WMS-140 Fixed an issue where the display settings are not getting changed in the extended mode. WMS-258 Fixed an issue where the Wyse Management Suite console fails to report the IP address of thin clients that are available in office.
Table 37. Known issues (continued) Issue number Issue description Workaround LASSEN-1921 The User Session reports are not sent to Wyse Management Suite Server when you restart or shutdown the system. There is no workaround. WMSNG-84 The resource file contains special character "()" which is not deletable. There is no workaround. WMSNG-343 The Domain Join policy is not getting applied when the Chrome Auto update package is pushed with enrollment validation off. Re-Publish the Domain Join Policy.
Table 39. Server or device agent details (continued) File name Description Version wda-2.4.3-00.01.x86_64.tar Wyse Device Agent package for ThinLinux 1.0 2.4.3-00.01.x86_64 wda_3.4.7-08_amd64.tar Wyse Device Agent package fo ThinLinux 2.0 3.4.7.08 DCA_1.0.0-392_amd64_signed.tar Dell Client Agent 1.0.0.392 DCA_Enabler_1.0.0-72_amd64_signe Dell Client Agent Enabler d.tar.gz 1.0.0.72 configUI_signed.zip 1.0.87 ConfigUI Package Windows Server configuration requirements Table 40.
8 Installing package or upgrading image Downloading the installation file 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request... field, type the Service Tag or the model number of your device, and click Search. 3. On the product support page, click Drivers & downloads. 4. Select the appropriate operating system. 5. From the list, locate the file entry and click the download icon.
9 Resources and support Accessing documents using the product search 1. Go to www.dell.com/support. 2. In the Enter a Service Tag, Serial Number, Service Request, Model, or Keyword search box, type the product name. For example, Wyse 3040 thin client or Wyse ThinOS. A list of matching products is displayed. 3. Select your product. 4. Click Documentation. Accessing documents using product selector You can also access documents by selecting your product. 1. 2. 3. 4. 5. 6. Go to www.dell.com/support.
10 Contacting Dell Dell provides several online and telephone-based support and service options. Availability varies by country and product, and some services may not be available in your area. To contact Dell for technical support or customer service issues, see www.dell.com/contactdell. If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or the product catalog.
