Administrator Guide

Table 126. Admin password settings
Parameter Description
Enable Admin Password Select this check box to enable the BIOS administrator
password. Successful changes to this password take effect
immediately.
Admin Password Enter the new BIOS admin password. This option is available
only if you select the Enable Admin Password check box.
Table 127. Auto-On settings
Parameter Description
Auto On From the drop-down list, set the time of day you want the
system to turn on automatically.
Table 128. Reboot schedule
Parameter Description
Reboot Option Some BIOS settings require system reboot. When Reboot
later option is selected, devices restart when the current time
matches the set time. From the drop-down list, you can select
any of the following options:
● Reboot immediately
● Reboot later
● Do not reboot
Table 129. USB configuration
Parameter Description
Enable Front USB Ports Select this check box to enable the device attached to this
port. If you select this check box, the device is made available
to the operating system also. However, if the USB port
is disabled, the operating system cannot detect any device
attached to this port.
Enable Rear USB Ports Select this check box to enable the device attached to this
port. If you select this check box, the device is made available
to the operating system also. However, if the USB port
is disabled, the operating system cannot detect any device
attached to this port.
Table 130. Power management settings
Parameter Description
Wake on AC From the drop-down list, select an option to specify how the
system must behave when AC power is restored after an AC
power loss. The available options are:
● Off
● Last
● On
Wake On LAN From the drop-down list, select an option to allow the thin
client to power up from the off state. You can trigger a thin
client to power up from the off state by using a LAN signal or
a wireless LAN signal.
64 Managing groups and configurations