Administrator Guide

Methods to register devices to Wyse Management
Suite
You can register a thin client to the Wyse Management Suite by using any of the following methods:
● Register manually through the User Interface provided by the Wyse Device Agent (WDA) on the device.
● Register automatically by configuring the appropriate option tags on the DHCP server.
● Register automatically by configuring the appropriate DNS SRV records on the DNS server.
NOTE:
● For a public cloud, register a thin client by providing the Wyse Management Suite URL, and the group token for the group to
which you want to register the device.
● For a private cloud, register a thin client by providing the Wyse Management Suite URL, and the group token (Optional for
the group to which you want to register this device. Devices are registered to the unmanaged group, if the group token is
not provided.
Registering ThinOS devices by using Wyse Device Agent
To register the ThinOS devices manually, do the following:
Steps
1. From the desktop menu, go to System Setup > Central Configuration.
The Central Configuration window is displayed.
2. Click the WDA tab. The WDA service automatically runs after the client boot up process is complete.
WMS is selected by default.
Figure 6. Central Configuration
3. Select the Enable Wyse Management Suite check box to enable Wyse Management Suite.
4. Enter the Group Registration Key as configured by your administrator for the desired group.
5. Select the Enable WMS Advanced Settings option, and enter the WMS server or MQTT server details.
6. Enable or disable CA validation based on your license type. For public cloud, select the Enable CA Validation check box, and
for private cloud, select the Enable CA Validation check box if you have imported certificates from a well-known certificate
authority into your Wyse Management Suite server.
Managing devices
131