Manualshelf

Administrator Guide

ManualsBrandsDell ManualsConverged InfrastructureWyse Management Suite
11121314151617181920
Table Of Contents
If a policy configuration has to be prioritized between the different levels, then the lowest-level policy takes precedence.
After you configure the policy settings, thin clients are notified about the changes. Changes take effect immediately after
configuring the thin clients.
NOTE: Certain settings, such as BIOS configuration for Windows Embedded Standard require a restart for the changes to
take effect. However, most of the settings on ThinOS, you must restart the device for the changes to take effect.
The policies are enforced in the following precedence:
● Global
● Group
● Device
Topics:
• Add a group
• Edit a group
• Remove a group
• Edit an unmanaged group
• Configure a global level policy
• Configure a group level policy
• Configure a device level policy
• Edit the ThinOS policy settings
• Edit the Windows Embedded Standard policy settings
• Edit the Linux policy settings
• Edit the ThinLinux policy settings
• Editing Teradici policy settings
• Edit the Wyse Software Thin Client policy settings
Add a group
About this task
To add a group, do the following:
Steps
1. On the Groups & Configs page, click the
icon.
2. In the Add New Group(s) dialog box, enter the Group Name and Description.
NOTE: To change the name and description of a group, use Active Directory.
3. In the Registration tab, select the Enabled check box under Group Token.
4. Enter the group token.
NOTE:
The devices can be registered to a group by entering the group token which is available on the device
registration screen.
5. In the Administration tab, you can select the name of group admin(s), who should manage this group. From the Available
Group Admins box, select the particular group and click the right arrow to move it to the Assigned Group Admins box. To
move one group from the Assigned Group Admins to Available Group Admins, do vice versa.
6. Click Save.
The group is added to the list of available groups on the Groups & Configs page.
Edit a group
About this task
To edit a group, do the following:
18
Managing groups and configurations