Administrator Guide

# CA Validation
DNS Record Type: DNS Text
Record Name: _WMS_CAVALIDATION.<Domain>
Value Returned: TRUE or FALSE (as String)
Example: _WMS_CAVALIDATION.WDADEV.com
c. Group Registration Key—Enter the Group Registration Key as configured by your Wyse Management Suite
administrator for the desired group. To verify the key, click Validate Key.
A Group Registration Key is not required for the private Wyse Management Suite server. You can provide the Wyse
Management Suite server details to allow the device to check in to Wyse Management Suite. ThinOS registers to a
quarantine tenant in Wyse Management Suite.
d. Enable WMS Advanced Settings—Select this check box to enter the Wyse Management Suite server, MQTT server
details, and to enable the CA validation. By default, the MQTT server option is disabled. The MQTT server value is
populated after the ThinOS device is checked in to the Wyse Management Suite.
NOTE: If you enable the Wyse Management Suite, make sure that you have entered the Group Registration Key
and configured the Wyse Management Suite advanced settings.
For more information about using Wyse Management Suite to manage the ThinOS devices, see the Wyse Management Suite
v1.1 Administrator's Guide at Dell.com/manuals.
3. Click OK to save the settings.
Example
Service checked in status is displayed in System Information tab.
Next steps
To configure the WDM settings, do the following:
1. Click WDM, and use the following guidelines:
2. WDM Servers—Enter the IP addresses or host names, if WDM is used. Locations can also be supplied through user profiles,
if user INI profiles are used.
3. DNS Name Record—(Dynamic Discovery) Allows devices to use the DNS host name lookup method to discover a WDM
Server.
Managing devices
113