Administrator Guide

Edit the Dell Generic Client policy settings
Prerequisites
● Create a group with a group token for the devices.
● Register the Dell Generic Client to Wyse Management Suite.
Steps
1. Go to the Groups & Configs page, and select a group.
2. From the Edit Policies drop-down menu, click Generic Client.
The Configuration Control | Generic Client window is displayed.
3. Click the Advanced option.
4. Select the options that you want to configure.
5. In the respective fields, click the setting and configure the options as required.
NOTE: From Wyse Management Suite 3.2, you can click the Reset Policy option if you want to reset the policy to
default configurations.
6. Click Save & Publish.
NOTE: After you click Save & Publish, the configured settings are also displayed in the Standard tab.
The following table lists the feature set that you can configure in the Configuration Control | Generic Client window.
Table 7. Generic Client policy settings
Feature Sub feature—User policy
group
Sub feature—Device policy group
Privacy & Security Certificate Certificate
Agent Logging Level Logging level Logging level
Create and import bulk device exception file
From Wyse Management Suite 3.1, you can deploy device exception configurations to multiple ThinOS 9.x devices.
Steps
1. Create a bulk device exception file. To create a file, do any of the following:
● Create a group policy for a test group and then export that policy to a file. If the configuration contains passwords, they
are replaced with * in the exported file. For example:
{
"WMSVersion": "4.6.8",
"exportedDate": "1581466633677",
"deviceTypes": [
{
"type": 6,
"configurations": {
"version": "0.0.1",
"sequence": 1581466506281,
"parameters": {
"AdminModeUsername": {
"value": "admin",
"updatedAt": "1581466506234"
},
"AdminModePassword": {
"value": "********",
"updatedAt": "1581466506234"
},
"TerminalName": {
"value": "outpatient",
Managing groups and configurations
51