Administrator Guide

CAValidation=True
2. Place the wlx ini file in the wyse\wlx folder.
3. Go to Settings and switch to admin on the ThinLinux thin client.
4. Go to Management > INI.
5. Enter the FTP server URL.
6. Click Save, and then restart the thin client.
7. Go to Management > Wyse Device Agent.
In the Wyse Device Agent tab, observe that the Wyse Management Server details are available in the respective field and
the client entry can be seen in Wyse Management Server>Devices page.
Registering devices by using DHCP option tags
You can register the devices by using the DHCP option tags.
Table 6. Registering device by using DHCP option tags
Option Tag Description
Name—WMS
Data Type—String
Code—165
Description—WMS Server FQDN
This tag points to the Wyse Management Suite server URL. For example,
wmsserver.acme.com, where wmsserver.acme.com is fully qualified domain
name of the server where Wyse Management Suite is installed.
NOTE: Do not use https://FQDN or FQDN:443 in the server URL, or the
thin client will not register to Wyse Management Suite.
Name—MQTT
Data Type—String
Code—166
Description—MQTT Server
This tag directs the device to the Wyse Management Suite Push Notification
server (PNS). For a private cloud installation, the device gets directed to the
MQTT service on the Wyse Management Suite server. For example,
wmsservername.domain.com:1883.
To register your devices in Wyse Management Suite public cloud, the device
should point to the PNS (MQTT) servers in public cloud. For example,
US1:us1-pns.wysemanagementsuite.com
EU1:eu1-pns.wysemanagementsuite.com
You must enter the MQTT server details when you configure Wyse Device
Agent details in the older version of ThinOS and Windows Embedded devices.
MQTT is a component of WMS which is required to notify the thin clients. The
URLs—with and without MQTT details—must be added to the allowlist in the
Wyse Management Suite public cloud environment.
NOTE: You cannot use the MQTT URLs to log in to Wyse Management
Suite.
Name—CA Validation
Data Type—String
Code—167
Description—Certificate Authority
Validation
You can enable or disable CA validation option if you are registering your
devices with Wyse Management Suite on private cloud. By default, the CA
validation is enabled in the public cloud. You can disable the CA validation in the
public cloud as well.
Enter True, if you have imported the SSL certificates from a well-known
authority for https communication between the client and Wyse Management
Suite server.
Enter False , if you have not imported the SSL certificates from a well-known
authority for https communication between the client and Wyse Management
Suite server.
Name—GroupToken
Data Type—String
Code—199
This tag is required to register the ThinOS devices with Wyse Management
Suite on public or private cloud.
This tag is optional to register the Windows Embedded Standard or ThinLinux
devices with Wyse Management Suite on private cloud. If the tag is not
Managing devices 57