Administrator Guide
Figure 113. Peripherals—Audio
2 Click the Audio tab to select the volume settings for connected devices.
a Click the Playback Devices tab to select the type of the audio from the drop-down menu.
• Use slider to control the volume settings for the playback devices.
• Select the check box to mute.
b Click the Recorded Devices tab to select the type of the record from the drop-down menu.
• Use slider to control the volume settings for the record devices.
• Select the check box to mute.
c The Recorder tab allows you to do the following tasks:
• Collect information about the speaker and microphone currently being used.
• Examine the performance of the speaker and microphone currently being used.
• Export the recorded audio sample to a USB key for archiving and further analysis.
For example, the connected USB headsets are displayed in the drop-down. Select the HD Audio option for analog earphone use,
the Speaker check box to enable the internal speaker, and the Boost check box for audio enhancement.
d Select the Speaker check box to connect the speaker.
e Select the Boost check box to boost the connected devices.
Conguring the Camera Settings
Use the Camera tab to interface with cameras that are locally connected to the zero client (USB) and supported by a UVC driver. When
using the HDX RealTime webcam feature of XenDesktop / XenApp , you can control options such as maximum resolution and frames per
second (10 FPS is recommended).
By default, the format of USB camera is set to RAW.
122
Conguring Zero Client Settings