Administrator Guide
Table 20. Parameters for a xen.ini File
Parameter Description
AddCerticate=<lename>
password=<plain text password>
Password-enc=<encrypted password>
Species a certicate le residing in the subfolder cacerts under the xen
folder to load on the nand ash device on platforms with nand ash, or on
the memory.
The length of the lename, including the trailing period and the le
extension, is limited to 64 characters. This is required when conguring
the Citrix Secure Gateway PNAgent Interface (PNAgent/Lite servers) in
the Network Setup dialog box.
Adding certicates are required if the user CSG environments use
certicate agents that are not covered by the built-in certicates. The
certicates are used to validate server identities by your zero client.
Supported les include .crt le on ICA CSG; .cer and .pfx in 802.1x.
password and Password-enc are used for .pfx les.
AddCerticate=client cert.pfx
password=passpass
The Caradigm Vault server uses the certicate to validate the connection
between the Tap Server and the zero client. Use this INI parameter
certicate to Zero Client.
AdminMode={yes, no}
[admin-username=<encrypted_username>]
[admin-password=<encrypted_password>]
[Username=<username>]
[Password=<password>]
[ShowAdmin]={yes, no}
[Enc-username=encrypted_username]
[Enc-password=encrypted_password]
Default is no.
AdminMode — Yes/no option to use the username and the password to
obtain a high privilege zero client conguration when the Privilege
parameter level is set to high (Privilege=high).
admin-username — Species if admin-username=encrypted_username,
then encrypted strings are used for admin-username, no minimum length;
maximum length is 30 characters—15 characters convert to 30
characters encrypted.
admin-password — Species if admin-password=encrypted_password,
then encrypted strings are used for admin-password, no minimum length;
maximum length is 30 characters—15 characters convert to 30
characters encrypted.
Enc-username — Species if the username is encrypted, and encrypted
strings are used for the Enc-username.
Enc-password — Species if the password is encrypted, and encrypted
strings are used for the Enc-password.
IMPORTANT:
• Enc-password — Species if the password is encrypted, and
encrypted strings are used for the Enc-password.
• password — Species the password, no minimum length;
maximum length is 15 characters.
AutoLoad=[0, 1, 2, 101, 102, 201, 202]
[LoadPkg={0, 1, 2}]
[AddPkg={pkg1_name, pkg2_name, …}]
[DelPkg={pkg1_name, pkg2_name, …}]
[VerifySignature={yes,no}]
Default is 1.
Species the rmware update mode.
0 — Disable checking for image.
1 — (Default) Enable a forced rmware upgrade/downgrade process.
2 — Enable a comparison/non-forced upgrade only process.
101 — Enable rmware upgrade/downgrade process, but have a popup
message that identies the rmware version, and then prompts with OK
and Cancel buttons appearing before the process; completion message
appears after process.
Creating and Using xen.ini Files 171