Administrator Guide

Parameter Description
Type=http Server=server1:1234
user=$UN password=$PW
(OR)
Proxy=yes AppList=ccm \
Type=http Server=server1:1234 user=abc password=xyz \
Type=socks5 Server=server2:4321 user=abc password=1234
(OR)
Proxy=yes AppList=ccm;fr \
Type=Global
Server=server_global
user=user_global
password=password_global_encrypted
Encrypt=yes
RapportDisable={yes, no}
[DHCPinform = {yes, no}]
[DNSLookup = {yes, no}]
[QuickMode = {yes, no}]
[Discover={yes, no}]
[SecurityMode= {default, full, warning, low}]
If this option is set to yes, the Rapport agent will be disabled.
We support to discover WDM server by the following options:
1 DHCP option tag values received from standard or WDM proxy
DHCP service for vendor class “RTIAgent”.
2 DNS service location record "_wdmserver._tcp".
3 DNS host name lookup "wdmserver".
When RapportDisable=no, setting DHCPinform=yes will do #1, and
setting DNSLookup=yes will do #2 and #3.
If QuickMode is set to yes, then the rapport agent will not block any other
process during ThinOS Lite boot up and increases the boot time of
ThinOS Lite .
If Discover=yes is specied, rapport will discover WDM server information
from DHCP option tag, DNS service location record, and DNS host name.
If the WDM server is discovered, the WDM server UI is protected on the
device. Default=yes.
IMPORTANT: If le server is changed by WDM server, device
will reboot automatically to make sure all settings from WDM
server take eect. Default is yes.
SecurityMode species the SSL certication validation policy.If set to
default, SecurityPolicy setting is applied.If set to full, the SSL connection
needs to verify server certicate. If it is untrusted, drop the connection.If
set to warning, the SSL connection needs to verify server certicate. If it
is untrusted, it is up to you to continue or drop the connection.If set to
low, the server certicate is not checked. The value is persistent, and the
default value of the setting is default. If the settings are factory default or
if you are upgrading to ThinOS Lite 2.3 for the rst time, the value is
temporarily set to low. After loading any INI, it goes to Default.
RapportServer=<server_list>
[Retry=<retry number value>]
IMPORTANT: DISCONTINUED. DO NOT USE. Use
WDMService parameter.
Creating and Using xen.ini Files 203