Administrator Guide
Parameter Description
NOTE:
If the Resolution or Refresh parameter values are changed, the
zero client will reboot without notice to the user.
rotate — Rotate allows you to rotate monitors for viewing in Portrait
mode. For example:
screen=1 resolution=1280x1024 refresh=60
rotate=none
NOTE:
Due to processing power requirements, rotate is not recommended
and supported on the C class platforms at this time.
IMPORTANT:
The Screen parameter must be placed before the Resolution
parameter. For example:
screen=1 resolution=1280x1024 refresh=60
rotate=none
RootPath=<le server root path>
This le server root path is entered into the zero client local setup (non-
volatile memory). The zero client immediately uses this path to access
les. The directory name \xen will be appended to the le server root
path entry before use.
**ScreenSaver=value{0, 1, 3, 5, 10, 15, 30}
[LockTerminal={0, 1, 2, 3}]
[Type={0, 1, 2, 3, 4}]
[VideoLink=httplink]
[VideoSpan=no]
[Unit=hour]
[Image=imagele]
[PictureTimer={2-60}]
[PictureOrder=random]
[PictureCheck=always]
[PictureLayout={stretch, tile, center}]
[Sleep={0-180}]
Screensaver— Species to put the thin client in a screensaver state
when the time limit for inactivity is reached, that is delay before starting is
reached.
Default value is 10. Value and delay before starting the screensaver:
0 — Disabled
1 — 1 Minute
3 — 3 Minutes
5 — 5 Minutes
10 — 10 Minutes
15 — 15 Minutes
30 — 30 Minutes
The default screen saver value is 10 minutes and the maximization value is
30 minutes.
LockTerminal— This is an optional parameter and species to put the
thin client in LOCK state when the screen saver is activated. Default is 0.
0 — Disabled.
1 — Puts the thin client in a LOCK state when the screen saver is
activated. The wallpaper is shown and the user is prompted with an
unlock dialog box to enter the sign-on password to unlock the thin client.
LockTerminal settings are saved into NVRAM if LockTerminal=1and
EnableLocal=yes is set in the xen.ini le.
2— Puts the thin client in a LOCK state when the screen saver is
activated, however, the wall paper cannot be viewed when the user is
Creating and Using xen.ini Files
205