Administrator Guide

Parameter Description
NOTE:
For the 2013 year, DST dates are Sunday, March 10, 2:00am and
ends Sunday, November 3, 2:00am.
TimeZoneName — Display name sent to the ICA session such as
Eastern Standard Time.
DayLightName — Display name for daylight saving time. If daylight
saving time is enabled, DayLightName should be named something
similar to Eastern Daylight Time, otherwise it should be the same as
TimeZoneName.
Overall Example:
TimeZone="GMT – 08:00" \
ManualOverride=Yes Daylight=Yes Start=030107
End=110107 \
TimeZoneName="Pacific Standard Time" \
DayLightName="Pacific Daylight Time"
VncPassword=<password>
[encrypt={no, yes}]
VncPassword=password — Species a string of up to 8 characters as
the password used for shadowing.
encrypt — Default is no. Yes/no option to encrypt the password; an
encrypted string is used as a password ensures US HIPPA and Congress
Acts compliance. See also MaxVNCD parameter.
VNCPrompt={yes, no}
[{Accept, Reject}=<value from 10 through 600>]
[ViewOnly={no, yes}]
[ActiveVisible={no, yes}]
Default is yes.
VNCPrompt — Yes/no option to enable a VNC shadowing prompt to a
user (VNCPrompt set to yes means the user will always be prompted
before shadowing starts and the user will then decline or accept VNC
shadowing; VNCPrompt set to no means the user will not be able to
decline or accept shadowing. See also MaxVNCD parameter.
Accept, Reject — Default is 10. Species the amount of time (in
seconds) a user has to accept or reject the VNC shadowing prompt
before the client desktop is shadowed.
ViewOnly — Default is no. Yes/no option to specify that the desktop
being shadowed can only be viewed by the person who is shadowing no
keyboard or mouse events are allowed to interfere with the zero client
being shadowed.
ActiveVisible — Default is no. Yes/no option to display a VNC
session-end notice after the VNC session ends.
VPN=openconnect
[Description=string_description]
[Server=server_ip_or_name]
[Username=username_string]
[Password=password_string]
[Autoconnect={yes,no}]
[Username-enc=encrypted_username_string]
The INI openconnect enables you to connect to Cisco AnyConnect VPN
servers, that use standard TLS protocols for data transport.
Description species the session name. The length of the string is limited
to 21 characters.
Server species the VPN server IP or the VPN server name. The length
of the string is limited to 63 characters.
Username species the login username. The length of the string is limited
to 31 characters.
Password species the login password. The length of the string is limited
to 31 characters.
218 Creating and Using xen.ini Files