Technical Guide
Table Of Contents
- Dell EMC PowerEdge T550 Technical Guide
- Contents
- Product overview
- System features
- Chassis views and features
- Processor
- Memory
- Storage
- Networking and PCIe
- Power, thermal, and acoustics
- Supported Operating Systems
- Dell EMC OpenManage systems management
- Appendix A. Additional specifications
- Appendix B. Standards compliance
- Appendix C Additional resources
- Appendix D. Support and Deployment Services
- Dell Financial Services (DFS)
Table 4. Features available on the front of the system (continued)
Item Ports, panels, and slots Icon Description
2 System health and ID
indicator
Indicates the status of the system. For more information about
System health and system ID indicator codes, see the www.dell.com/
poweredgemanuals.
3 Information tag
N/A The Information tag is a slide-out label panel that contains system
information such as Service Tag, NIC, MAC address, and so on. If
you have opted for the secure default access to iDRAC, then the
Information tag also contains the iDRAC secure default password.
4
Status LED indicators N/A Enables you to identify any failed hardware components. There are
up to five status LEDs and an overall system health LED bar. For
more information about Status LED indicators, see the www.dell.com/
poweredgemanuals.
5 USB 2.0 port
The USB ports are 4-pin, 2.0-compliant. These ports enable you to
connect USB devices to the system.
6 USB 3.0 port
The USB ports are 9-pin and 3.0-compliant. These ports enable you to
connect USB devices to the system.
7 NVMe drives N/A Enables you to install NVMe drives that are supported on your system.
8 BOSS S2 module (optional) N/A This slot supports the BOSS S2 module.
9 Drive N/A Enables you to install SAS/SATA drives that are supported on your
system.
Chassis views and features 13