Owners Manual

For AHCI or RAID mode, BIOS support is always enabled.

Model Specifies the drive model of the selected device.

Drive Type Specifies the type of drive attached to the SATA port.

Capacity Specifies the total capacity of the hard drive. This field is

undefined for removable media devices such as optical

drives.

Port H Sets the drive type of the selected device. For Embedded SATA settings in ATA

mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS

support.

For AHCI or RAID mode, BIOS support is always enabled.

Model Specifies the drive model of the selected device.

Drive Type Specifies the type of drive attached to the SATA port.

Capacity Specifies the total capacity of the hard drive. This field is

undefined for removable media devices such as optical

drives.

Port I Sets the drive type of the selected device. For Embedded SATA settings in ATA

mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS

support.

For AHCI or RAID mode, BIOS support is always enabled.

Model Specifies the drive model of the selected device.

Drive Type Specifies the type of drive attached to the SATA port.

Capacity Specifies the total capacity of the hard drive. This field is

undefined for removable media devices such as optical

drives.

Port J Sets the drive type of the selected device. For Embedded SATA settings in ATA

mode, set this field to Auto to enable BIOS support. Set it to OFF to turn off BIOS

support.

For AHCI or RAID mode, BIOS support is always enabled.

Model Specifies the drive model of the selected device.

Drive Type Specifies the type of drive attached to the SATA port.

Capacity Specifies the total capacity of the hard drive. This field is

undefined for removable media devices such as optical

drives.

Boot Settings details

The Boot Settings screen details are explained as follows:

Boot Mode

Enables you to set the boot mode of the system.