Support Matrix

Supported hardware, firmware, and software
7 Dell EMC XC430 Series Hyper-Converged Appliance Support Matrix | A27
1.4 Supported HBAs
This section provides information about Host Bus Adapters (HBA) supported by your hardware.
Supported HBAs
Name
Form factor/Slot
Minimum firmware version
Latest version
Windows Driver for 2012R2, 2016
2.51.21.1
HBA330
Mini or integrated slot
9.17.20.07
15.17.09.06
1.5 Supported networking
This section provides information about networking supported by your hardware and supported NICs.
Intel branded Network Daughter Cards (NDC) and Network Interface Cards (NIC) specify the use of only Intel
branded SFP+ optical modules for use with optical cables. When ordering a system with optics, the
appropriate Intel branded SFP+ optical modules are included with your order. If you already have SFP+
optical modules, ensure they are the Intel branded modules before inserting into the NDC or NIC. Twinax
cables are also the supported network cables for Intel NDC and NIC.
CAUTION: Using any brand of SFP+ module other than Intel during deployment disables the 10 GbE ports. Call Dell
Support to recover port functionality.
WARNING: Hot-plugging an unsupported SFP+ module causes ESXi host to fail with purple diagnostic screen. Call Dell
Support to recover from this situation.
1.6 Supported networking
Supported networking
Name
Minimum firmware version
Latest version
Broadcom Dual 1GbE LOM
7.10.59
20.08.04.04
1.7 Supported NICs
Supported NICs
Vendor
Description
Chipset
Intel
CRD,NTWK,10G,SFP+,DP FVL,INTEL
x710
CRD,NTWK,PCIE,1GB,DP,INT,LP,V3
i350
CRD,NTWK,10G BASET,DP,INTEL,LP
x540
CRD,NTWK,10G,SFP+,DP,INT,LP,V2
x520