Deployment Guide

54 Dell EMC XC Xpress Hyper-Converged Appliance Deployment Guide for Hyper-V | A02
11. Repeat steps for ICMPv6, selecting ICMPv6 for Protocol Type instead of ICMPv4.
C.6 Why can’t I discover my appliances
Reasons you cannot discover appliances include:
 IPv6 not enabled on management station
 Firewall on management workstation blocking ports
 Switch is filtering the ports
 Management station on a different VLAN or subnet than appliances
Make sure you open the ports. Verify HTTP proxy is configured in Nutanix Prism. For more information on
managing your HTTP proxy see section “Setting up the HTTP proxy in Prism.”