Deployment Guide

6 Wyse Datacenter Appliance XC for VMware View
Figure 3 Creating Storage Pool
3. Type a name for the pool (for example, SP1) and use all unallocated disk space. Click Save. On the
Create Container page, to view additional settings, click the Advanced Settings button. The
recommended settings are as follows:
 Replication Factor: 2
 Reserved Capacity: 4096 GB (only for the “Compute” container that contains the persistent
virtual desktops)
 Compression: Disabled
 Delay: 0 minutes
 Perf Tier Deduplication: On
 Capacity Tier Deduplication: On (Post-Process)
4. Type a name for the management container. For example, “ds_mgmt, and click Save. Click +
Container to add another container for the compute or RDSH layer. Use the same advanced settings,
type a name (for example, ds_compute or ds_rdsh) and click Save. If you are using desktops and RDSH
on the same cluster, create an additional container for logical separation.
Figure 4 Overview