Owners Manual

Convention iDRAC Direct
LED indicator
pattern
Condition
C Green and turns
off
Indicates that the file transfer is complete.
D Not lit Indicates that the USB is ready to be removed or that a task is
complete.
The following table describes about iDRAC Direct activity when configuring iDRAC Direct using your
laptop and cable (Laptop connect).
Table 6.
iDRAC Direct LED indicator pattern Condition
Solid green for two seconds Indicates that the laptop is connected.
Flashing green (on for two seconds and off for
two seconds)
Indicates that the laptop connected is recognized.
Turns off Indicates that the laptop is unplugged.
Back-panel features and indicators
Figure 4. Back-panel features and indicators
Table 7. Back-panel features and indicators
Item Indicator, button, or
connector
Icon Description
1 System identification
button
You can use the identification buttons
on the front to locate a particular system
within a rack. When one of these
buttons is pressed, the LCD panel on the
front and the system status indicator on
the back flashes until one of the buttons
is pressed again.
Press to toggle the system ID on and off.
If the system stops responding during
13