Owners Manual

Figure 45. Installing the TPM
1. TPM 2. TPM connector
3. slot on the TPM connector 4. plastic bolt
5. slot on the system board
Re-enabling the TPM for BitLocker users
Initialize the TPM.
For more information on initializing the TPM, go to http://technet.microsoft.com/en-us/library/
cc753140.aspx.
The TPM Status changes to Enabled, Activated.
Re-enabling the TPM for TXT users
1. While booting your system, press F2 to go to System Setup.
2. On the System Setup Main Menu screen, click System BIOS → System Security .
3. From the TPM Security option, select On with Pre-boot Measurements.
4. From the TPM Command option, select Activate.
5. Save the settings.
6. Restart your system.
7. Go to System Setup.
8. On the System Setup Main Menu screen, click System BIOS → System Security.
9. From the Intel TXT option, select On.
99