Support Matrix

Supported hardware, firmware, and software
8 Dell EMC XC730 Series Hyper-Converged Appliance Support Matrix | A24
1.4 Supported HBAs
This section provides information about Host Bus Adapters (HBA) supported by your hardware.
Supported HBAs
Name Form factor/Slot
Minimum firmware
version
Latest version
H730
Mini or integrated
slot
25.3.0-0016
25.5.5.0005
Windows driver for H730
6.604.06.00
HBA330
Mini or integrated
slot
9.17.20.07
NOTE: This version is
supported on AOS
4.1.3. x.
15.17.09.06
Window Server 2012R2, 2016 drivers for
HBA330
v2.51.21.1
1.5 Supported networking
This section provides information about networking supported by your hardware and supported NICs.
Intel branded Network Daughter Cards (NDC) and Network Interface Cards (NIC) specify the use of only Intel
branded SFP+ optical modules for use with optical cables. When ordering a system with optics, the
appropriate Intel branded SFP+ optical modules are included with your order. If you already have SFP+
optical modules, ensure they are the Intel branded modules before inserting into the NDC or NIC. Twinax
cables are also the supported network cables for Intel NDC and NIC.
CAUTION: Using any brand of SFP+ module other than Intel during deployment disables the 10 GbE ports. Call Dell EMC
Support to recover port functionality.
WARNING: Hot-plugging an unsupported SFP+ module causes ESXi host to fail with purple diagnostic screen. Call Dell
EMC Support to recover from this situation.