Owner`s manual

Installing the Coin-Cell Battery

1. Place the coin cell battery in its slot on the system board and press until the release latch springs back into place

and secures it.

2. Install:

a. expansion card

b. cover

3. Follow the procedures in

After Working Inside Your Computer

Removing the Hard Drive

1. Follow the procedures in

Before Working Inside Your Computer

2. Remove:

a. cover

b. front bezel

3. Disconnect the data cable and the power cable from the back of the hard drive. Press the blue securing-bracket

tabs inwards and lift the hard-drive bracket out of the hard-drive bay.

4. Flex the hard-drive bracket and remove the hard drive from the hard-drive bracket.