Owners Manual

book.book Page 19 Tuesday, October 23, 2012 12:44 AM

Removing the mSATA Card

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in "Before You

Begin" on page 7. After working inside your computer, follow the instructions

in "After Working Inside Your Computer" on page 9. For additional safety

best practices information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

Prerequisites

1 Remove the base cover. See "Removing the Base Cover" on page 10.

2 Remove the battery. See "Removing the Battery" on page 13.

Procedure

1 Peel the mylar from the mSATA card.

1 mylar

2 Remove the screw that secures the mSATA card to the mSATA-card connector.

3 Lift the mSATA card out of the mSATA-card connector.

Removing the mSATA Card |