Owners Manual

16 | Removing the Speakers
Removing the Speakers
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in
"Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 10.
2 Disconnect the power-light board cable from the system board. See "Removing the
Power-Light Board" on page 12.
3 Remove the battery. See "Removing the Battery" on page 14.
Procedure
1 Disconnect the I/O cable from the I/O board and the system board.
2 Disconnect the left-speaker cable from the I/O board.
3 Release the wireless-card cables from the routing guide on the left speaker.
4 Remove the screws that secure the left speaker to the palm-rest assembly.
1 I/O cable 2 I/O board
1
2