Owners Manual

OM_Book.book Page 13 Tuesday, September 25, 2012 2:30 PM
3
Base Cover
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Removing the Base Cover
1 Close the display and turn the computer over.
2 Using a Torx 5 screwdriver, remove the screws that secure the base cover to
the palm-rest assembly.
3 Using your fingertips, lift the base cover starting from the back of
your computer.
4 Remove the base cover off the palm-rest assembly.
1 2
1 base cover 2 screws (10)
Base Cover 13