Service Manual

Steps

1. Connect the fan cable to the system board.

2. Slide fan below the heat sink and align the screw holes on fan with the screw holes on the system board and palm-rest and keyboard

assembly.

3. Replace the two screws (M2x4) that secure the fan to the system board and palm-rest and keyboard assembly.

Next steps

1. Install the base cover.

2. Follow the procedure in After working inside your computer.

Removing the right fan

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the base cover.

About this task

The following images indicate the location of the right fan and provide a visual representation of the removal procedure.

Removing and installing components