Setup Guide

Figure 16. Removing the video fan

routing guide 2. touch-screen cable (optional)

3. tape 4. fan cable

5. video fan (JFAN_2) 6. screws (2)

7. Remove the two screws (M2x4) that secure the processor fan (JFAN_1) to the system board.

8. Note the routing of the display cable and remove the cable from the processor fan (JFAN_1).

9. Disconnect the processor fan (JFAN_1) cable from the system board.

10. Lift the processor fan (JFAN_1) away from the palm-rest assembly.

Removing the fans