Setup Guide

Removing the memory modules

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the base cover.

2. Remove the battery (half-length) or the battery (full-length).

Procedure

1. Using your fingertips, spread apart the securing clips on each end of the memory-module slot until the memory module pops

up.

2. Slide and remove the memory module from the memory-module slot.

Figure 19. Removing the memory modules

a. memory module

b. securing clips (2)

c. memory-module slot

40 Removing the memory modules