Setup Guide

Removing the antenna cover

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Prerequisites

1. Remove the base cover.

2. Remove the battery (half-length) or the battery (full-length).

3. Remove the wireless card.

4. Remove the display assembly.

Procedure

1. Carefully turn the display hinges at an angle.

Figure 32. Turning the display hinge

a. display assembly

b. display hinges (2)

2. Slide and lift the antenna cover away from the display assembly.

Removing the antenna cover 61