Setup Guide

Replacing the display hinges

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the

steps in Before working inside your computer. After working inside your computer, follow the instructions in After working

inside your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/

regulatory_compliance.

Procedure

1. Align the screw holes on the display hinges with the screw holes on the display assembly.

2. Replace the six screws (M2.5x5) that secure the display hinges to the display assembly.

3. Adhere the tape to the display hinges.

Post-requisites

1. Replace the antenna cover.

2. Replace the display assembly.

3. Replace the wireless card.

4. Replace the battery (half-length) or the battery (full-length).

5. Replace the base cover.

66 Replacing the display hinges