Service Manual

26 Optical Drive
Replacing the Optical Drive
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the new optical drive from its packaging.
3 Slide the optical drive into the optical-drive bay until it is fully seated.
4 Replace the screw that secures the optical drive to the base cover.
5 Replace the memory module(s) (see "Replacing the Memory Module(s)"
on page 18).
6 Replace the module cover (see "Replacing the Module Cover" on page 16).
7 Replace the battery (see "Replacing the Battery" on page 14).
1 optical drive 2 screw
3 plastic scribe 4 optical-drive bracket
1
2
3
4