Service Manual

32 Palm-Rest Assembly

Replacing the Palm-Rest Assembly

Follow the instructions in "Before You Begin" on page 9.

Slide the touch-pad cable and the power button cable into the

system-board connectors and press down on the connector latches to

secure the cables.

Align the tabs on the palm-rest assembly with the slots on the top cover

and gently snap the palm-rest assembly into place.

Close the display and turn the computer over.

Replace the screw that secures the palm-rest assembly to the base cover.

Replace the battery (see "Replacing the Battery" on page 14).

1 power-button cable connector 2 touch-pad cable connector

3 palm-rest assembly