Service Manual

46 Keyboard
9 Lift the keyboard off the top cover.
Replacing the Keyboard
1 Follow the instructions in "Before You Begin" on page 9.
2 Slide the keyboard cable into the system-board connector and press down
on the connector latch to secure the cable.
3 Slide the backlight keyboard cable into the system-board connector and
press down on the connector latch to secure the cable.
4 Slide the tabs on the keyboard into the slots on the top cover and lower the
keyboard into place.
5 Replace the two screws that secure the keyboard to the top cover.
1 keyboard cable connector 2 keyboard
3 keyboard tabs (4) 4 top cover
1
4
3
2