Service Manual
120 TV Antenna Connector
11
Follow the instructions from step 9 to step 14 in "Removing the Top
Cover" on page 83.
12
Remove the I/O board (see "Removing the I/O Board" on page 115).
13
Make note of the TV antenna connector cable routing and remove the
cable from the routing guides.
14
Remove the two screws that secure the TV antenna connector to the top
cover.
15
Carefully ease the TV antenna connector off the slot in the top cover and
lift it off the top cover.
Replacing the TV Antenna Connector
1
Follow the instructions in "Before You Begin" on page 9.
1 TV antenna connector 2 TV antenna connector cable
3 top cover
1
2
3
book.book Page 120 Wednesday, April 25, 2012 2:11 PM