Service Manual

124 USB Board
11 Follow the instructions from step 9 to step 14 in "Removing the Top
Cover" on page 83.
12 Turn the top-cover assembly over.
13 Lift the connector latch and disconnect the USB-board cable from the
connector on the USB board.
14 Remove the screw that secures the USB board to the top cover.
15 Carefully ease the connectors on the USB board out of the slots in the top
cover, and lift the USB board off the top cover.
Replacing the USB Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connectors on the USB board with the slots on the top cover and
place the USB board on the top cover.
1 screw 2 USB board
3 USB-board cable connector
1
2
3
book.book Page 124 Wednesday, April 25, 2012 2:11 PM