Service Manual

20 Memory Module(s)
4 Replace the module cover (see "Replacing the Module Cover" on page 16).
5 Replace the battery (see "Replacing the Battery" on page 14).
6 Connect the AC adapter to your computer and an electrical outlet.
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
7 Turn on the computer.
As the computer boots, it detects the additional memory and automatically
updates the system configuration information.
To confirm the amount of memory installed in the computer:
Click Start Control Panel
 System and Security  System.
1 tab 2 notch
3 memory-module connector
book.book Page 20 Wednesday, April 25, 2012 2:11 PM