Service Manual

Display 63
b Remove the six screws that secure the display panel to the display back
cover.
7 Note the routing of the antenna cables and remove them from the routing
guide on the right display hinge.
8 Note the routing of the display cable and remove it from the routing guide
on the left display hinge.
9 Lift the display panel off the display back cover.
Replacing the Display Panel
1 Follow the instructions in "Before You Begin" on page 9.
1 display panel 2 screws (6)
3 IR emitter board cable 4 IR emitter board
3
4
2
1
book.book Page 63 Wednesday, April 25, 2012 2:11 PM