Service Manual

68 Display
CAUTION: Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Display Hinges
Removing the Display Hinges
1
Follow the instructions in "Before You Begin" on page 9.
2
Remove the display assembly (see "Removing the Display Assembly" on
page 55).
3
Remove the display bezel (see "Removing the Display Bezel" on page 59).
4
Remove the camera module ("Removing the Camera Module" on
page 77).
5
Remove the display panel (see "Removing the Display Panel" on page 60).
6
Remove the four screws (two on each side) that secure the display hinges
to the display back cover.
7
Remove the display hinges off the display back cover.
book.book Page 68 Wednesday, April 25, 2012 2:11 PM