Service Manual

Removing the memory modules

WARNING: Before working inside your computer, read the safety

information that shipped with your computer and follow the steps in Before

working inside your computer. After working inside your computer, follow

the instructions in After working inside your computer. For more safety best

practices, see the Regulatory Compliance home page at

www.dell.com/

regulatory_compliance.

Prerequisites

Remove the computer cover.

Procedure

1 Locate the memory-module slot on the system board.

For more information, see “System-board components”.

2 Press out the securing clip at each end of the memory-module slot.

NOTE: If the memory module is difficult to remove, gently ease the

memory module back and forth to remove it from the slot.