Service Manual
Table Of Contents
- XPS 8940 Service Manual
- Contents
- Working inside your computer
- Removing and installing components
- Recommended tools
- Screw list
- Major components of XPS 8940
- Left-side cover
- Optical drive (optional)
- Power button
- Front cover
- 2.5-inch hard drive
- 3.5-inch hard drive
- Chassis fan
- Memory modules
- Wireless card
- Solid-state drive/Intel Optane
- Graphics card
- Coin-cell battery
- Power-supply unit
- Processor fan and heat-sink assembly
- Processor
- Voltage regulator heat sink (optional)
- System board
- Drivers and downloads
- System setup
- Troubleshooting
- Getting help and contacting Dell
Steps
1. Connect the antenna cables to the wireless card.
The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.
Table 2. Antenna-cable color scheme
Connectors on the wireless card Antenna-cable color
Main (white triangle) White
Auxiliary (black triangle) Black
2. Slide and place the wireless-card bracket on the wireless card.
3. Align the notch on the wireless card with the tab on the wireless-card slot.
4. Slide the wireless card at an angle into the wireless-card slot.
5. Replace the screw (M2x3) that secures the wireless card to the system board.
Next steps
1. Install the 3.5-inch hard drive.
2. Install the left-side cover.
3. Follow the procedure in After working inside your computer.
Removing and installing components
33