Service Manual

Steps

1. Align the tabs on the optical-drive bezel with slots on the optical drive and snap it in place.

2. Align the screw hole on the optical-drive bracket with the screw hole on the optical drive.

3. Replace the screw (M2x3) that secures the optical-drive bracket to the optical drive.

4. Slide the optical drive into the optical-drive cage through the front of the computer until it snaps into place.

5. Connect the power and data cables to the optical drive.

Next steps

1. Install the left-side cover.

2. Follow the procedure in After working inside your computer.

Removing and installing components