Service Manual

Steps

1. Align the notch on the solid-state drive/Intel Optane with the tab on the M.2 card slot.

2. Slide the solid-state drive/Intel Optane into the M.2 card slot on the system board.

3. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.

Next steps

1. Install the graphics card.

2. Install the left-side cover.

3. Follow the procedure in After working inside your computer.

NOTE:

Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about

enabling the Intel Optane memory, see Enabling Intel Optane.

Graphics card

Removing the graphics card

Prerequisites

1. Follow the procedure in Before working inside your computer.

2. Remove the left-side cover.

About this task

The following images indicate the location of the graphics card and provide a visual representation of the removal procedure.

Removing and installing components