Dell XPS M1710 Service Manual Dell™ XPS™ M1710 Service Manual Before You Begin Optical Drive Hard Drive Memory Module(s) Modem Mini-Card Internal Card With Bluetooth® Wireless Technology Hinge Cover Keyboard Display Palm Rest Coin-Cell Battery Speakers Subwoofer USB Port Board Processor Thermal-Cooling Assembly Processor Module Video Card/Thermal-Cooling Assembly System Fan(s) ExpressCard Cage Smart Card Reader System Board Battery Latch Assembly Flashing the BIOS Pin Assignments for I/O Connectors Notes
Before You Begin: Dell XPS M1710 Service Manual Back to Contents Page Before You Begin Dell™ XPS™ M1710 Service Manual Recommended Tools Turning Off Your Computer Before Working Inside Your Computer This section provides procedures for removing and installing the components in your computer. Unless otherwise noted, each procedure assumes that the following conditions exist: You have performed the steps in Turning Off Your Computer and Before Working Inside Your Computer.
Before You Begin: Dell XPS M1710 Service Manual NOTICE: Handle components and cards with care. Do not touch the components or contacts on a card. Hold a card by its edges or by its metal mounting bracket. Hold a component such as a processor by its edges, not by its pins. NOTICE: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is not covered by your warranty.
Subwoofer: Dell XPS M1710 Service Manual Back to Contents Page Subwoofer Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Optical Drive: Dell XPS M1710 Service Manual Back to Contents Page Optical Drive Dell™ XPS™ M1710 Service Manual Your computer ships with a fixed optical drive installed. NOTICE: To help prevent damage to drives, store them in a safe, dry place when they are not installed in the computer. Avoid pressing down on them or placing heavy objects on top of them. 1. Follow the instructions in Before Working Inside Your Computer. 2. Turn the computer upside down and remove the M2.
USB Port Board: Dell XPS M1710 Service Manual Back to Contents Page USB Port Board Dell™ XPS™ M1710 Service Manual Removing the USB Port Board Replacing the USB Port Board Removing the USB Port Board CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
USB Port Board: Dell XPS M1710 Service Manual 1 USB port board 2 M2.5 x 5-mm screw 3 notch 4 USB-port-board cable 5 system board connector 6 tab 7 pin Replacing the USB Port Board 1. Insert the notch on the USB port board under the small tab on the computer base and the other side of the board over the pin. 2. Replace the M2.5 x 5-mm screw. 3. Reconnect the cable to the system board. 4. Replace the palm rest (see Replacing the Palm Rest). 5.
Hard Drive: Dell XPS M1710 Service Manual Back to Contents Page Hard Drive Dell™ XPS™ M1710 Service Manual Removing the Hard Drive Replacing the Hard Drive Returning a Hard Drive to Dell Removing the Hard Drive CAUTION: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive. CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Hard Drive: Dell XPS M1710 Service Manual Replacing the Hard Drive NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector. 1. Slide the drive into the bay until it is fully seated. 2. Replace and tighten the screws. 3. If you have installed a replacement hard drive, reinstall the Microsoft® Windows® operating system. For instructions, see "Restoring Your Operating System" in the Owner's Manual.
Processor Thermal-Cooling Assembly: Dell XPS M1710 Service Manual Back to Contents Page Processor Thermal-Cooling Assembly Dell™ XPS™ M1710 Service Manual Removing the Processor Thermal-Cooling Assembly Replacing the Processor Thermal-Cooling Assembly Removing the Processor Thermal-Cooling Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Processor Thermal-Cooling Assembly: Dell XPS M1710 Service Manual Replacing the Processor Thermal-Cooling Assembly 1. Place a new thermal pad over the old thermal pad on the thermal-cooling assembly: a. Remove the backing from the new thermal pad, taking care not to tear the pad. NOTE: You can place the new thermal pad directly on any existing thermal pad already installed on the thermal-cooling assembly. It is not necessary to remove an existing pad or to clean the surface. b.
Memory Module(s): Dell XPS M1710 Service Manual Back to Contents Page Memory Module(s) Dell™ XPS™ M1710 Service Manual Removing the Memory Module(s) Replacing the Memory Module(s) Removing the Memory Module(s) CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's electronic components.
Memory Module(s): Dell XPS M1710 Service Manual 1 memory module 2 securing clips (2) Replacing the Memory Module(s) NOTE: To get maximum performance/dual-channel memory bandwidth capability, both memory module connectors must contain memory modules and the modules must be of the same size and configuration. NOTE: If a memory module is not installed properly, the computer does not boot. 1. Ground yourself and install the new memory module: a.
Memory Module(s): Dell XPS M1710 Service Manual NOTICE: If the memory module cover is difficult to close, remove the module and reinstall it. Forcing the cover to close may damage your computer. 3. Insert the battery into the battery bay, and connect the AC adapter to your computer and an electrical outlet. 4. Turn on the computer. As the computer boots, it detects the additional memory and automatically updates the system configuration information.
Processor Module: Dell XPS M1710 Service Manual Back to Contents Page Processor Module Dell™ XPS™ M1710 Service Manual Removing the Processor Module Replacing the Processor Module Removing the Processor Module CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Processor Module: Dell XPS M1710 Service Manual 1 ZIF-socket cam screw 2 pin-1 corner of microprocessor 3 ZIF-socket NOTE: The ZIF-socket cam screw secures the processor to the system board. 8. Lift the processor module from the ZIF socket. Replacing the Processor Module NOTICE: Ensure that the cam lock is in the fully open position before seating the processor module. Seating the processor module properly in the ZIF socket does not require force.
Processor Module: Dell XPS M1710 Service Manual 3. Replace the processor thermal-cooling assembly (see Replacing the Processor Thermal-Cooling Assembly). 4. Replace in reverse order the remaining components that you removed in Removing the Processor Module, beginning with step 5. Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/cpu.
Modem: Dell XPS M1710 Service Manual Back to Contents Page Modem Dell™ XPS™ M1710 Service Manual Removing the Modem Replacing the Modem Removing the Modem CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Modem: Dell XPS M1710 Service Manual 1 system board connector 2 M2 x 3-mm screw 4 modem 5 modem cable 3 pull-tab NOTICE: Do not disconnect the modem cable from the system board. 5. Disconnect the modem cable from the modem. Replacing the Modem 1. Connect the modem cable to the modem. NOTICE: Ensure that the modem cable is routed correctly when you replace the modem. 2. Connect the modem to the system board.
Video Card/Thermal-Cooling Assembly: Dell XPS M1710 Service Manual Back to Contents Page Video Card/Thermal-Cooling Assembly Dell™ XPS™ M1710 Service Manual Removing the Video Card/Thermal-Cooling Assembly Replacing the Video Card/Thermal-Cooling Assembly Removing the Video Card/Thermal-Cooling Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Video Card/Thermal-Cooling Assembly: Dell XPS M1710 Service Manual 1 captive screws (4) 2 video card/thermal-cooling assembly 3 system board connector Replacing the Video Card/Thermal-Cooling Assembly NOTE: Ensure that the video card/thermal-cooling assembly mylar flap rests on top of the processor thermal-cooling assembly when the video card/thermal-cooling assembly is in place. 1. Carefully align the video card/thermal-cooling assembly over the connector on the system board and press down.
Mini-Card: Dell XPS M1710 Service Manual Back to Contents Page Mini-Card Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. CAUTION: Only products approved for use in your portable computer may be installed. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Mini-Card: Dell XPS M1710 Service Manual 1 antenna connectors (2) 2 Mini-Card 3 Mini-Card connector b. Release the Mini-Card by pushing the metal securing clips toward the back of the computer until the card pops up slightly. c. Lift the Mini-Card out of its connector. 1 Mini-Card 2 securing clips (2) NOTICE: The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors and realign the card. 5. Install the replacement Mini-Card: a.
Mini-Card: Dell XPS M1710 Service Manual 1 triangles (2) 4 securing clips (2) 2 Mini-Card connector 3 antenna connectors (2) NOTICE: To avoid damaging the Mini-Card, never place cables under the card. NOTE: If you are installing a Mini-Card for the first time, you will find a clear plastic protective sleeve on each antenna cable connector. Before you connect the antenna cables to the Mini-Card, slide the sleeves off of the cable connectors. b.
Mini-Card: Dell XPS M1710 Service Manual file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/cards.
System Fan(s): Dell XPS M1710 Service Manual Back to Contents Page System Fan(s) Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
System Fan(s): Dell XPS M1710 Service Manual 1 M2.5 x 5-mm screws (2) 2 fan for video card/thermal- cooling assembly, if installed 3 fan cables (2) 4 connectors on system board (2) Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/fans.
Internal Card With Bluetooth® Wireless Technology: Dell XPS M1710 Service Manual Back to Contents Page Internal Card With Bluetooth® Wireless Technology Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
ExpressCard Cage: Dell XPS M1710 Service Manual Back to Contents Page ExpressCard Cage Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
ExpressCard Cage: Dell XPS M1710 Service Manual Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/cardcage.
Hinge Cover: Dell XPS M1710 Service Manual Back to Contents Page Hinge Cover Dell™ XPS™ M1710 Service Manual Removing the Hinge Cover Replacing the Hinge Cover Removing the Hinge Cover CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Hinge Cover: Dell XPS M1710 Service Manual Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/hingecvr.
Smart Card Reader: Dell XPS M1710 Service Manual Back to Contents Page Smart Card Reader Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Smart Card Reader: Dell XPS M1710 Service Manual Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/smartcar.
Keyboard: Dell XPS M1710 Service Manual Back to Contents Page Keyboard Dell™ XPS™ M1710 Service Manual CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Keyboard: Dell XPS M1710 Service Manual file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/keyboard.
System Board: Dell XPS M1710 Service Manual Back to Contents Page System Board Dell™ XPS™ M1710 Service Manual Removing the System Board Replacing the System Board Removing the System Board CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
System Board: Dell XPS M1710 Service Manual 1 ExpressCard connector 2 ExpressCard connector on system board 1 USB-port-board connector 3 speaker connectors (2) 2 subwoofer connector 4 cable connector for internal card with Bluetooth wireless technology 12. Disconnect the smart-card reader connector from the system board. 13. Disconnect the speaker connectors from the system board. 14. Disconnect the connector for the internal card with Bluetooth® wireless technology from the system board. 15.
System Board: Dell XPS M1710 Service Manual 18. Remove the video card/thermal-cooling assembly, if present (see Removing the Video Card/Thermal- Cooling Assembly). NOTE: Remove the video card/thermal-cooling assembly as a single unit. Do not separate the thermal-cooling unit (heat sink) from the video card. 19. Remove the processor thermal-cooling assembly (see Removing the Processor Thermal-Cooling Assembly). 20. Remove the processor (see Removing the Processor Module). 21. Remove the docking frame: a.
System Board: Dell XPS M1710 Service Manual 1 system board M2.5 x 5-mm screws (4) 23. Remove the system board, slowly easing the connectors out of their access holes on the back and side of the computer base: a. With the back of the computer facing you, grasp the upper-right corner of the system board and lift it slightly. b.
System Board: Dell XPS M1710 Service Manual 2. Turn on the computer. NOTE: If you use a BIOS update program CD to flash the BIOS, press before inserting the CD so that you can set up the computer to boot from a CD this one time only. Otherwise, you must enter the system setup program to change the default boot order. 3. Insert the flash BIOS update program CD that accompanied the replacement system board into the optical drive. Follow the instructions that appear on the screen.
Display: Dell XPS M1710 Service Manual Back to Contents Page Display Dell™ XPS™ M1710 Service Manual Display Assembly Display Bezel Display Panel Display Latch Display Assembly Removing the Display Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Display: Dell XPS M1710 Service Manual 4. Turn the computer top-side up. 5. Remove the hinge cover (see Removing the Hinge Cover). 6. Use the pull-tab to disconnect the display cable from the system board, and then disengage the display cable from the cable channel. 7. Disconnect the LED cable from the system board. 8. Remove the four M2.5 x 5-mm screws (two on each side) that connect the display to the computer base. 1 display cable in cable 2 display cable pull-tab 3 M2.
Display: Dell XPS M1710 Service Manual channel 4 LED cable in cable channel 1 (4) 5 LED cable connector on system board Mini-Card antenna cables NOTICE: When removing the display assembly, carefully unthread the Mini-Card antenna cables through the computer base and ensure that the plastic protectors—if present—remain on the individual cables. 9. Lift the display assembly away from the computer. Replacing the Display Assembly 1.
Display: Dell XPS M1710 Service Manual 2. Align the display assembly over the screw holes in the base of the computer. NOTE: The left hinge assembly has a small tab that you must first insert underneath the edge of the palm rest. 1 tab NOTE: When you replace the four screws, ensure that you tighten them in the order indicated by the labels "1," "2," "3," and "4" on the display hinges. 3. Replace the four M2.5 x 5-mm screws. 4. Connect the display cable to the system board. 5.
Display: Dell XPS M1710 Service Manual Display Bezel 1 shoulder screws (4, two at the top and two at the bottom) 2 screw covers (2) 4 rubber screw-covers/display bumpers (6) 5 display bezel 3 M2.5 x 5-mm screws (4, one on each corner) Removing the Display Bezel CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Display: Dell XPS M1710 Service Manual toward the bottom edge (A) of the display assembly to clear the tab on the bottom of the lower-right corner. Then pull the bezel toward the right side of the display assembly to clear the tab on the side (B) of the lower-right corner. 1 display back cover 2 tabs 7. Repeat step 6 for the lower-left corner of the bezel. Then use your fingers to release the snaps around the rest of the bezel and lift it away from the display panel. file:///C|/Users/santhosh_v.
Display: Dell XPS M1710 Service Manual 1 display bezel 2 display panel Replacing the Display Bezel 1. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the display panel. 2. Replace the four M2.5 x 5-mm screws on the corners of the bezel. 3. Replace the four shoulder screws and two screw covers. 4. Replace the six rubber screw-covers/display bumpers around the bezel. Display Panel Removing the Display Panel file:///C|/Users/santhosh_v.
Display: Dell XPS M1710 Service Manual 1 display panel 2 M2 x 3-mm screws (8) 3 display back cover 4 grounding wire and captive screw CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface (such as the back panel) on the computer.
Display: Dell XPS M1710 Service Manual 1 pull-tab on bottom flex-cable connector 2 top flex-cable connector 3 display cable connector 4 inverter connector Replacing the Display Panel 1. Reconnect the top display-cable connector to the top flex-cable connector. 2. Reconnect the bottom flex-cable connector to the inverter connector. 3. Replace the display panel inside the display back cover. 4. Tighten the captive screw that attaches the display-panel ground wire to the display back cover. 5.
Display: Dell XPS M1710 Service Manual 2. Remove the display assembly (see Removing the Display Assembly). 3. Remove the display bezel (see Removing the Display Bezel). 4. Slide the latch to the right and gently lift. 5. Remove the spring that attaches the latch to the display back cover. 1 spring 2 display latch Replacing the Display Latch 1. Replace the spring that attaches the latch to the display panel. 2.
Battery Latch Assembly: Dell XPS M1710 Service Manual Back to Contents Page Battery Latch Assembly Dell™ XPS™ M1710 Service Manual Removing the Battery Latch Assembly Replacing the Battery Latch Assembly Removing the Battery Latch Assembly CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Battery Latch Assembly: Dell XPS M1710 Service Manual 8. Remove the M2 x 2.5-mm screw in the battery latch assembly. When you remove the screw, the battery latch release on the bottom of the computer will also be released. 1 M2 x 2.5-mm screw 2 battery latch assembly 9. Remove the spring from the hook on the computer base by lifting it up and away with a screwdriver or a plastic scribe. 1 hook 2 spring 10.
Battery Latch Assembly: Dell XPS M1710 Service Manual 1 battery latch assembly Replacing the Battery Latch Assembly 1. Insert the latch assembly into the channel on the computer base, and press it into place. 2. Using a small screwdriver, hook the spring over the hook on the computer base. 3. Place the battery latch release under the computer base, line it up with the hole in the base, and then replace the M2 x 2.5-mm screw in the assembly.
Palm Rest: Dell XPS M1710 Service Manual Back to Contents Page Palm Rest Dell™ XPS™ M1710 Service Manual Removing the Palm Rest Replacing the Palm Rest Removing the Palm Rest CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Palm Rest: Dell XPS M1710 Service Manual to remove the coin-cell battery from the palm rest. 8. Remove the coin-cell battery from the palm rest, if appropriate (see Removing the Coin-Cell Battery). 9. Turn the computer upside down and remove the 12 M2.5 x 8-mm screws from the bottom of the computer. 1 M2.5 x 8-mm screws (12) 10. Turn the computer top-side up and disconnect the touch-pad connector from the system board. 1 touch-pad connector 2 LED board connector 11.
Palm Rest: Dell XPS M1710 Service Manual Replacing the Palm Rest 1. Align the palm rest with the base and gently snap the palm rest into place. 2. Reconnect the touch-pad connector to the system board. 3. Reconnect the LED board connector to the system board. 4. Replace the coin-cell battery, if appropriate (see Replacing the Coin-Cell Battery). 5. Reconnect the coin-cell battery cable to the system board. 6. Replace the six M2.5 x 5-mm screws on the top side of the palm rest. 7.
Flashing the BIOS: Dell XPS M1710 Service Manual Back to Contents Page Flashing the BIOS Dell™ XPS™ M1710 Service Manual NOTICE: Plug the AC adapter into a known good power source to prevent a loss of power. Failure to do so may cause system damage. 1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
Coin-Cell Battery: Dell XPS M1710 Service Manual Back to Contents Page Coin-Cell Battery Dell™ XPS™ M1710 Service Manual Removing the Coin-Cell Battery Replacing the Coin-Cell Battery Removing the Coin-Cell Battery CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide.
Coin-Cell Battery: Dell XPS M1710 Service Manual 1 coin-cell battery 2 release latch 3 battery cable connector Replacing the Coin-Cell Battery 1. Install the replacement battery: a. With the positive side up, insert the battery at a 30-degree angle under the release latch, and then push the battery into place. b. Connect the battery cable to the connector on the system board. 2. Replace the keyboard (see Keyboard). 3. Replace the hinge cover (see Replacing the Hinge Cover).
Pin Assignments for I/O Connectors: Dell XPS M1710 Service Manual Back to Contents Page Pin Assignments for I/O Connectors Dell™ XPS™ M1710 Service Manual USB Connector Video Connector S-Video TV-Out Connector IEEE 1394 Connector USB Connector Pin Signal 1 USB5V+ 2 USBP– 3 USBP+ 4 GND Video Connector Pin Signal Pin Signal 1 CRT_R 9 5V+ 2 CRT_G 10 GND 3 CRT_B 11 MONITOR_DETECT– 4 NC 12 DDC_DATA 5 GND 13 CRT_HS 6 GND 14 CRT_VS 7 GND 15 DDC_CLK 8 GND file:///C|/U
Pin Assignments for I/O Connectors: Dell XPS M1710 Service Manual S-Video TV-Out Connector S-Video Pin Signal 1 GND 2 GND 3 DLUMA-L 4 DCRMA-L Composite Video Pin Signal 5 NC 6 DCMPS-L 7 GND IEEE 1394 Connector Pin Signal 1 TPB– 2 TPB+ 3 TPA– 4 TPA+ Back to Contents Page file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/pinasign.
Speakers: Dell XPS M1710 Service Manual Back to Contents Page Speakers Dell™ XPS™ M1710 Service Manual Removing the Speakers Replacing the Speakers Removing the Speakers CAUTION: Before you begin the following procedure, follow the safety instructions in the Product Information Guide. NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
Speakers: Dell XPS M1710 Service Manual 4 speakers (2) 5 speaker cables (2) 6 connectors on system board (2) Replacing the Speakers 1. Connect the speaker cable connectors to the connectors on the system board. 2. Align the speakers on the screw holes for securing the speakers to the computer base. 3. Replace the four M2.5 x 5-mm screws to secure the speakers in place (two on each speaker). 4.
