Owners Manual

40 | Removing the I/O Panel

Removing the I/O Panel

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on

page 11. After working inside your computer, follow the instructions in "After

Working Inside Your Computer" on page 13. For additional safety best practices

information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

Prerequisites

1 Remove the back cover. See "Removing the Back Cover" on page 17.

2 Remove the stand. See "Removing the Stand" on page 21.

3 Remove the trim cover. See "Removing the Trim Cover" on page 19.

Procedure

1 Push the I/O panel towards the top of the computer and then pivot the

I/O panel upward.

2 Ease the securing tabs on the I/O panel and lift the I/O panel off the

I/O-board assembly.

1 securing tabs 2 I/O panel

OM_Book.book Page 40 Wednesday, April 3, 2013 1:39 PM