Owners Manual

Removing the Power-Button Assembly | 75

Procedure

1 Disconnect the power-button cable from the system board.

2 Note the routing of the power-button cable and remove the power-button cable

from its routing guides.

3 Remove the screws that secure the power-button assembly to the display bezel.

4 Press the power button inward to release it from the slot on the display bezel and

then gently lift the power-button assembly off the display bezel.

1 power-button cable 2 power-button assembly

3screws (2)

OM_Book.book Page 75 Wednesday, April 3, 2013 1:39 PM